AR Stripper
Features:
•
Quickly Removes AR Coatings
• Simple Cold Dip and Rinse
Process (Takes 30 Seconds to 3 Minutes)
• No Expensive Equipment Needed
• Economical AR Stripping Kit
Description:
AR Stripper, from Phantom Research Laboratories Inc., is a stripping formula
for removing Anti-Reflective (AR) coatings from plastic CR-39 lenses.
Removing the AR coating is a simple cold dip and rinse process that takes
30 seconds to 3 minutes (depending on the type of AR coating) .
Prepare the Stripping Solution in a plastic container using cold or warm
tap water. Use the all-plastic lens holder to handle the lenses. Metal
and glass materials are not compatible with the Stripping Solution and
should not be used. We recommend using our AR Stripping Kit (Item #C493).
AR coated lenses are widely used and becoming increasingly popular. Optical
outlets and labs should be equipped to remove these coatings.
Packing & Shipping:
AR Stripper, 3 oz (85gm) bottle, Item #C495.
Complete AR Stripping Kit, 1.1 lb (499gm), Item #C493.
The kit includes:
- 1 AR Stripper, Item #C495
- 1 AR Stripping Solution Container with Lid,
Item #A300
- 1 AR Lens Holder, Item #T344
- 1 Pair of Rubber Gloves, Item #A142
- 1 Safety Glasses, Item #A305
Lenses are dipped into the AR Solution for 30
seconds to 3 minutes, then rinsed with water
3 oz AR Stripper
Directions:
Pour the contents of the 3 oz (85gm) AR Stripper bottle into
the AR Stripping Solution Container (32 fl.oz.).
Add 24 fl.oz. (710ml) water. Mix all crystals until they are
dissolved.
Dip lenses, using the all-plastic lens holder, for 30 seconds.
Remove and rinse.Refer to the instructions on the bottle and
the MSDS.
Privacy Policy - Terms & Conditions