OptiSafe® UV Formula III

• Features:

• 200 + UV treated lenses per packet
• Extended shelf life (over one year)
• Low shipping cost (each packet weighs less than 1 oz.)
• AR compatible
• Non-yellowing
• Clear formula
• Long lasting
• No boilovers
• 3 minute treatment for 96% UV absorption
• 5 minute treatment for97% UV absorption

• Description:

Super concentrated paste formula for making CR-39 lenses capable of absorbing ultraviolet radiation up to 400 nm in a simple treatment process. This formula is compatible with Anti-Reflection coating, tinting, and scratch resistance coating processes. The formula comes sealed in water dissolvable bags packaged in paper envelopes.


• Directions:

UV treat lenses easily by dipping the lenses into UV solution
heated to 205- 210°F (96-99°C) for 5 -10 minutes.
1. Open envelope and remove dissolvable bag.
2. Drop dissolvable bag into dye vat filled with water.


• Availability:

Less than 1 oz. packet (Item#C347), less than 1 oz. (28.4gm)
packet for UV treatment with Scratch Resistance Properties
(Item#C350).

 

• Equipment Needed:

      
1. One or more tanks in your dye heating unit can be allocated to heat the UV formula. An indirect heating unit utilizing heat transfer fluid is strongly recommended (e.g., Phantom Heating System). Any direct heating unit must incorporate stirring action to become suitable for heating the UV formula.
2. Clean lens holder. Lens holder used for UV treatment should not be dipped in other solutions to prevent cross contamination
  

 
Figure 1 Open envelope & remove dissolvable bag Figure 2 Drop dissolvable bag
into dye tank filled with water
© 2004-2005 PhantomResearch.com [Phantom and OptiSafe are registered trademarks of Phantom Research Labs.Inc, San Diego California]
Privacy Policy - Terms & Conditions
contact us our products Back home page click for support